STM32F107VCT6芯片 四层板工业设计

带以太网接口

带JTAG下载口

带上电指示灯及普通指示灯，复位按键等，各引脚通过标准2.54MM间距引出。

横向纵向均是2.54mm

Description:

The STM32-ETH-17V/UETcore board is based on the ST chip STM32F107VCT6. All the GPIOS are lead out by 2.54mm pitch. The Ethernet interface and testing program is provided.

With the JTAG interface you can use debugger STLINKIII or JLINKV8 to test your programe.

AN3102 STM32F107_ETH_LwIP_V1.0.0 programe package is provided and fit to the board.

Features:

• MCU: STM32F107VCT6 (100pin)
• STM32F107 Connectivity Line Cortex-m3 based microcontroller with embedded Ethernet MAC
• Core work at up to 72M frequency
• 256KB Flash and 64KB RAM
• Onboard 25 MHz crystal
• 1 Reset Key
• 1 Boot0 Key
• 1 Power Led
• 1 User Led
• USB device connector (+5 V Power supply)
• Onboard 3.3 V LDO regulator
• 20 PIN JTAG Debug port
• supporting 100BASE-TX and 10BASE-TX
• Ethernet PHY :DP83848
• RJ45 connector with embedded

transformer

• RMII configuration

STM32F107 LwIP Demonstration Package

STM32F107 Connectivity Line microcontrollers feature a complete 10/100 Ethernet MAC supporting MII and RMII with hardware support for the IEEE1588 Precise Time Protocol, enabling Ethernet connectivity for real-time applications.

The STM32F107 LwIP Demonstration Package is a set of networking applications for STM32F107 microcontrollers build on of the free LwIP TCP/IP stack, and contains:

1. DHCP client, for IP address setting
2. webserver
3. Server/Clients example, which uses multiple boards and allows clients to control the server's LEDs.

简介:

STM32-ETH-17V/UET核心板使用ST芯片STM32F107VCT6。所有GPIO都能过2.54mm标准间距通过双排针引出。提供以太网程序和核心板灯闪程序。出厂为以太网程序。

 用户可以用STLINK仿真噐或JLINK仿真器通过JTAG口仿真下载程序。

特点:

• MCU: STM32F107VC6 (100脚)
• 工作频率：72M
• 256KB Flash and 64KB RAM
• 板上25M 晶振
• TXD, RXD, GND焊盘
• 一个复位键
• 一个Boot0键
• 一个电源指示灯
• 一个用户指示灯
• 一个USB电源接口
• JTAG调试口
• 3.3V稳压电路
• 以太网PHY : DP83848
• RJ45接口
• 以太网RMII工作方式

订单编号: STM32-ETH-17V/UET

资源分配如图：

实物图：

长期现货供应